中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 1927.13-2022 无疵小试样木材物理力学性质试验方法 第13部分:横纹抗压弹性模量测定(中英文版) Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 13: Determination of transverse grain compressive modulus of elasticity |
|||
GB/T 1927.11-2022 无疵小试样木材物理力学性质试验方法 第11部分:顺纹抗压强度测定(中英文版) Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 11: Determination of compressive strength along the grain |
|||
GB/T 41850.8-2022 机械振动 机器振动的测量和评价 第8部分:往复式压缩机系统(中英文版) Mechanical vibration - Measurement and evaluation of machine vibration - Part 8: Reciprocating compressor systems |
|||
GB/T 39960-2021 闭式单动机械压力机 参数和尺寸(中英文版) Straight-sided single-action mechanical power presses -- Characteristicsand dimensions |
|||
GB/T 7777-2021 容积式压缩机机械振动测量与评价(中英文版) Measurement and evaluation of mechanical vibration of displacement compressors |
|||
GB/T 1927.12-2021 无疵小试样木材物理力学性质试验方法 第12部分:横纹抗压强度测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in compression perpendicular to grain |
|||
GB/T 40938-2021 皮革 物理和机械试验 水渗透压测定(中英文版) Leather—Physical and mechanical tests—Determination of water penetration pressure |
|||
GB/T 16702-2019 压水堆核电厂核岛机械设备设计规范(中英文版) Design code for mechanical components in nuclear island of pressurized water reactor nuclear power plants |
|||
GB/T 37903-2019 数控压力机可靠性评定方法(中英文版) Reliability assessment method of NC mechanical presses |
|||
GB/T 37048-2018 高速公路机电系统防雷技术规范(中英文版) Technical specification for lightning protection of expressway electromechanical systems |
|||
GB/T 35091-2018 闭式高速压力机 型式与基本参数(中英文版) Straight-sided high-speed mechanical power presses—Types and basic parameters |
|||
NB/T 20390-2016 压水堆核电厂机械模块安装及验收技术规程(中英文版) (Pressurized water reactor nuclear power plant mechanical module installation and acceptance of technical regulations) |
|||
YD/T 3022.2-2016 通信光缆机械性能试验方法 第2部分:接插线光缆中被覆光纤的压缩位移(中英文版) (Communication Cable mechanical performance test methods - Part 2: fiber optic patch cord compression displacement of the coated optical fiber) |
|||
NB/T 20007.35-2015 压水堆核电厂用不锈钢 第35部分:安全壳机械贯穿件用06cr18ni11ti不锈钢板(中英文版) Stainless steel for pressurized water reactor nuclear power plants - Part 35: 06Cr18Ni11Ti stainless steel plates used for containment vessel mechanical penetrations |
|||
NB/T 20312-2014 压水堆核电厂核岛机械设备在役检查规则(中英文版) Code on the in-service Inspections of mechanical components of pressurized water reactor nuclear islands |
|||
GB 27607-2011 机械压力机 安全技术要求(中英文版) Mechanical press - Safety requirements |
|||
NB/T 47016-2011 承压设备产品焊接试件的力学性能检验(中英文版) Mechanical property tests of product welded test coupons for pressure equipments |
|||
GB 26483-2011 机械压力机 噪声限值(中英文版) Noise limits of mechanical presses |
|||
GB 14536.7-2010 家用和类似用途电自动控制器 压力敏感电自动控制器的特殊要求,包括机械要求(中英文版) Automatic electrical controls for household and similar use - Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
|||
GB/T 24319-2009 釜用高压机械密封技术条件(中英文版) Technical conditions of cauldron-using mechanical seal for high pressure |
找到:39條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |